|
|
|
|
|
|
Optimize Solar System Size, Increase Solar Power Production
 
Recover over 50% of power loss due to shade
The Xandex SunMizer collects more power from solar panels that are shaded during part of the day. When a panel is shaded, even the un-shaded panels loose power since they are wired together. SunMizer makes sure power is not lost from the un-shaded panels AND harvests power from partially shaded panels.
SunMizer is required only on shaded panels making it the most economical product available on the market.
SunMizer is produced with the highest quality and is backed by a 20 year warranty that includes replacement labor.
|
|
Improves Power Harvest
SunMizer is a per-panel DC-to-DC power optimizer that performs MPP
tracking at the panel substring level to increase power harvest.
SunMizer achieves maximum power flow from the panel during sub-optimal
module operating conditions caused by shade and soiling to recover over
50% of system level power loss.
SunMizer’s patent pending Optimum I-V for PVTM technology combines
simple design with the fewest, most robust power components available.
The result is best in class reliability and performance in the most
effective efficiency improvement solution available for PV.
Selective Installation
"Selective installation" gives SunMizer a unique advantage over
competing DC/DC power optimizers that require a unit on each panel in a
string. SunMizer can be installed selectively, only on the solar panels
that experience regular shade or soiling. Selective installation
provides optimized power output at a lower initial cost and that means
faster return on investment for the system owner.
Compatibility and Installation
SunMizer is lightweight (< 2 kg) and its compact dimensions of 6” x
4” x 1.6” (15 x 10 x 4 cm) make it easy to install directly to panel
racking with standard rack system fasteners and nuts. Each unit has an
integral ground lug that also accepts a ring terminal connection.
SunMizer is currently compatible with Unirac Solarmount Standard and
Lite, ProSolar Rooftrac, AEE SnapNrack, DPW Power-Fab, Schletter and
Unistrut rack systems. SunMizer is connected in-line with PV panels
using standard series wiring schemes and does not require special- ized
wiring or “add-on” equipment.
SunMizer is compatible with a large list of 156mm cell architecture
models from most major panel manufacturers worldwide. Panels with a
maximum power rating of 250W (Pmax), 48V (VOC), and 9A (ISC) can be used
with SunMizer (see product specification sheet). SunMizer is compatible
with most 208V and 240V residential size inverters.
Built to Last
SunMizer is built in the USA by the solar products division of Xandex
Inc. using the finest long-life components and materials. Since 1981,
Xandex has designed and manufactured products used in the exacting
semiconductor test industry. SunMizer is designed to last the lifetime
of any solar installation and tested to rigorous Military and Telecomm
quality standards that insure the highest level of quality, performance
and long life. A weather- proof NEMA 6 (IP67) enclosure ensures that the
unit will not be affected by dust intrusion, water or ice. Each unit is
covered by a 20 year warranty with replacement labor provision.
SunMizer is certified to the UL 1741 safety standard and the European CE
and GS standards. All SunMizer components are RoHS compliant (lead,
mercury and cadmium free).
|
|
|
|
SOLAR PANELS
